Tag Archives: teabowls

A Happy Soda Firing

I fired last week. When I’m done glazing, but before I load the soda kiln, I sit down and roll hundreds of wads for the bottom of my pieces. It always takes a ridiculously long amount of time. Time when I’m feeling a bit anxious about getting things done on schedule. When I was rolling my wads for this last kiln, it was a sunny day, and the morning sun was hitting them in the most beautiful way. I took this picture to share with all of you. My happy spin on a less than fun job.


Wadding Recipe
for the soda kiln (pretty standard) (by volume):
  • 1 part EPK
  • 1 part alumina hydrate
  • medium grog to taste (not really, but you know what I mean…)

I roll my wads ahead of time and put them in a plastic container (the ones from the local Thai take-out place are the best). Then I glue them to the bottoms of pots before loading (Elmer’s glue). Breaking up the wadding into steps keeps my hands cleaner and helps me avoid the problem of getting wadding where it doesn’t belong.

A shot of the front of the kiln. It was an interesting firing. I reduced the amount of soda that I added by about 25% or so.

(new) Soda Mixture:

  • 1.75 lbs. of soda ash
  • 2.25 lbs. of soda bicarb
  • 4 lbs. of whiting

Mixed together with 1/4 of a 5 gallon bucket of wood chips. Mix together well, then add enough water (while mixing) to the consistency of oatmeal cookie dough. I add it on an piece of angle iron through the ports on the front of the kiln when c. 9 is soft. (More on this in a future post.)

Below are some tea bowls that I got out of this firing. 


A Study of Continental Clay Bodies

I have recently done a little study of the high fire clay bodies from Continental Clay in Minneapolis. I made teabowls out of each of the clay bodies, and fired one in c. 10 reduction and one in soda (also c. 10 reduction). They are both glazed in a luster shino glaze which shows off the differences in the clay bodies beautifully. The c. 10 pots are glazed both inside and out with the shino glaze (left). The soda pots are glazed on the inside, and on the rim (right). There are 9 clays that I tested in total- so keep scrolling down… Enjoy!

**be sure to click on the images to see a much larger image and really see the details.**